Power First - PF-901 PF 902 - Lieo Controller DKN - YORK - TUNTURI
Special Price
€169.99
Regular Price
€240.00
In stock
SKU
X2LB-dcmd66-pettine+sensore2pin-con-staffa
Treadmill motor board compatible with Power First - PF-901 PF 902.
Fitted on treadmill type Power First used by many brands such as York, Tunturi, DKN and others.
Important: we supply a compatible controller. The original PF controllers are not manufactured anymore.
Installation
1. check on your front roller pulley, there should be a small round magnet on the plastic pulley.
2. Install the sensor provided in the kit, near the front roller. The sensor should be about 2/3 mm far from the magnet on the roller pulley
3. Install the new controller and connect the new sensor to the 2pin connector on the board.
Fitted on treadmill type Power First used by many brands such as York, Tunturi, DKN and others.
Important: we supply a compatible controller. The original PF controllers are not manufactured anymore.
Installation
1. check on your front roller pulley, there should be a small round magnet on the plastic pulley.
2. Install the sensor provided in the kit, near the front roller. The sensor should be about 2/3 mm far from the magnet on the roller pulley
3. Install the new controller and connect the new sensor to the 2pin connector on the board.
Motor control board for treadmill / running platforms (motor controller board), compatible with Power First - PF 901-PF 902.