Universal treadmill board and console kit to be used with 8 to 9 cm diameter DC motors

Availability: In stock

Regular Price: £360.00

Special Price £224.99

OR

Quick Overview

Universal treadmill board and console kit to be used with 8 to 9 cm diameter DC motors.

Universal CB

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Universal CB
  • Universal CB
  • Universal CB
  • Universal CB
  • Universal CB
  • Universal CB
  • Universal CB
  • Universal CB
  • Universal CB
  • Universal CB
  • Universal CB

Details

Universal kit, which includes a board and a console for treadmill. To be used with 8 to 9 diameter DC 180-230V motors.

Please note:

If your treadmill has manual tilt or your inclination motor doesn’t have position encoder, please contact us.

Functioning of the universal replacement kits and treadmill consoles

This kit is made up of:

Console with LCD backlight;

Display: 109 x 44 mm LCD,

Speed range 0.8 ~ 14 km / h

Motor controller board capable of driving engines up to 9 cm in diameter

Security key

Magnetic sensor kit + magnet to be placed on the treadmill roller to read the speed

Console Features

     Security key

     Provides reading of BMI (body mass index) and body fat

     Gradient control: engine inclination on 12 levels

     Programs: 1 manual, 7 pre-set programs, 3 targets, 2 HRCs and 2 user-set programs

     Easy control of speed, tilt and start / stop

     Predisposition for heartbeat control (via hand pulse or chest-belt by means of a special adapter)

Installation

Install the wiring of the new kit, possibly drilling the original console plastic

     Remove the original controller of the treadmill, including any transformers connected to it. You no longer need any transformer because the new controller is self-powered.

     Put the new engine card in the place of the old one, and then reconnect the cables

      Connect speed sensor 2 pins If the old board did not have speed sensor -> install the 2 pins sensor provided in the kit on the roller

If the old board had a 3 or 4 pins sensor -> remove the old sensor and install the 2 pins sensor provided in the kit on the roller

Connect 3 pins inclination sensor

         Connect Console data cable: 4 pins

       Connect Main motor cables: two faston connectors, M + (red) and M- (black)

       Connect Inclination Motor power cables: Three Faston Connectors, White COM - Red UP - Black DOWN

Connect AC power cables (place on AC connectors).

     Connect the console cables, in particular the motor-console data cable and any other connectors (handpulse, additional keyboards), as shown in the attached scheme

     Now paste the new console, using the two-sided tape supplied with the kit.

Check the console manual to see all functions: download the manual here

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x