Universal treadmill board and console kit – suitable for any DC treadmill motor

Availability: In stock

Regular Price: £360.00

Special Price £260.99

OR

Quick Overview

Universal treadmill controller and console kit, suitable for 180-230V DC motors.
Special notes: for treadmills with manual inclination and for treadmills with inclination without encoder, contact us. See in the video below how the universal replacement kit works.

Universal CB

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Universal CB
  • Universal CB
  • Universal CB
  • Universal CB
  • Universal CB
  • Universal CB
  • Universal CB
  • Universal CB
  • Universal CB
  • Universal CB
  • Universal CB

Details

This kit is made up of:
    console with backlight LCD, generous size
    powerful control board that can drive DC motors of any size
    security key
    magnetic sensor kit + magnet to be placed on the treadmill roller to read the speed
Console Features
    Security key
    Provides reading of BMI (body index) and body fat
    Gradient control: 12 levels inclination motor
    Programs: manual, 8 pre-set programs, objectives, HRC and 2 user settings
    Simple speed control, inclination and start / stop
    Predisposition for heartbeat control (via handpulse or chest belt by means of a special adapter)
Installation
    Pass the wiring of the new kit, by drilling a small hole in the original console plastic
    Remove the original treadmill's motor controller, including any connected transformers, which will no longer be needed
    Place the new control board in place of the old one, and then reconnect the cables as instructed.
        Speed ​​sensor 2 PIN connector
            if the old board did not have speed sensor -> install the 2 pin sensor provided in the kit on the roller
            if the old board had a 3 or 4 pin sensor - remove the old sensor and install the 2 pin sensor supplied in the kit on the roller
        Inclination sensor: 3 PIN connector
        Console data cable: 4 PIN connector
        Main motor cables: two Faston connectors, M + (red) and M- (black)
        Inclination Motor Cables: Three Faston Connectors, White COM - Red UP - Black DOWN
        AC power cables (place on AC connectors).
    Connect the console data cables, in particular, the controller-console data cable and any other connectors (handpulse, additional keyboards), as shown in the enclosed scheme
    Now paste the new console, using the two-sided tape supplied with the kit.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x