Lemmar high quality motor compatible with Icon 2,25/2,5 HP - original code 295735 - 237595 - 220687 - 251185 - 263753 - 261972 - 235170 - 217250 - 214366 - 301943...

Special Price €199.99 Regular Price €370.00
In stock
SKU
X3-MT-90-LM-10.2-CON-FASCE-10-12
Lemmar replacement motor for Icon PMDC motors. Some improvements have been introduced with this brand new Lemmar motor.

1. For additional user safety, a grounding cable has been added to the motor.

Warning: on all Weslo, Nordic Track and Proform treadmills, we suggest to step on the siderails, start the treadmill at very low speed (1mph/1kmh) and THEN walk on the running belt. In specific conditions, stepping directly on the belt and starting the treadmill may cause a current surge which can damage the treadmill motor.
Replacement motor for treadmill.

Suitable for home fitness equipment.

This Lemmar high quality motor is the perfect replacement for Icon standard motors.

This replacement treadmill motor has a diameter of 10,5 cm, and it is suitable to replace Icon motors with diameter between 9,5 and 12 cm.


Installation

1. Remove the motor fan from the old motor

2. Unscrew the two long screws, open the motor and remove thermal protection (blue cables)

3. Install the replacement motor

4. Apply the thermal protection on the new motor. Please insulate it with plastic from the frame, as shows in installation pictures

5. Connect motor black cable to A- and red cable to A+

6. Connect grounding cable

7. Connect blue thermal protection switch

Don't forget to
1. Clean and lube the running deck
2. Keep running belt cleaned
3. Check after each training if the motor becomes hot (over 45/50°C) or smells, more maintenance is required.


We found other products you might like!
© 2014- Salesource Limited. All Rights Reserved

All other trade-marks, service marks, registered trade-marks, or registered service marks mentioned in this Website are the property of their respective owners.

Contacts
Contact us by email and we will reply within 48 hours.
Sales: sales@partsfortreadmill.com

Company details: Salesource Limited, registered in England.
Registered address: 85 Great Portland Street, London, W1W 7LT, United Kingdom
Registration no. 08901785
Sales in the EU are managed by GP Services Limited, Malta, European Union.

All pictures shown are for illustrative purpose only and are meant for you to identify the spare part you need easily. Actual product may vary due to product enhancement. If not expressly stated otherwise, the shapes, sizes, specifications may be different. Our technicians have validated the compatibility of each item with the original spare part for all the items on the store.


This Website is safe. Start SSL certificate installed.
SSL certificate