LIEO PF902 | PF 901 | PF903 | DKN - Power First- BH Fitness | Replacement KIT
Special Price
€169.99
Regular Price
€240.00
In stock
SKU
X2LB-dcmd66-pettine+sensore2pin-con-staffa-1
Replacement kit for the motor controller board PF 902 - PF 901 - PF 903- PF-9022 PF-9021 (DKN, BH Fitness, Carnielli; First Power).
The kit consists of:
The kit consists of:
- Motor Controller board for treadmill, brandedEndex model DCMD57
- Magnetic speed sensor
Controller DCMD57 compatible with models PF 902 - PF 901 - PF 903 - PF-9022 PF-9021. Magnetic speed sensor. Power Incline with Faston connection type. See attached image to make changes if the original controller has other connector types.
If replacing PF controller with optical sensor it is necessary to replace the speed sensor with a magnetic one, already included in the kit. Check if the pulley on the front roller has a built in magnet. If not , insert into the slot a round magnet 1 cm / 0.39 in diam.
PF Controllers are a Endex compatible. Controllers PF-901, PF902 and PF903 can be replaced with Endex DCMD57, other controllers (PF905 - PF906) should be replaced with DCMD66 .
Technical specs
Input Voltage : 230V ± 15%
Output Power : Output Voltage Range 10 V ~ 200 V
Output Current - Max 12A
Links:
DC Motor Driver
J6 : AC power input
J7 : DC motor connection
J1 : Driver IO control
J3 : Motor speed signal input
Incline Motor Driver
J10 : Incline motor connection
J2 : Incline motor control IO
J4 : Incline motor position feedback
Adjustment trimmer:
V1 : Motor torque
RV3 : Max ( set before shipment)
LED
Q8: The console 's power supply DC12V light indication (green ) light up 【 】 Whenever power on
D7 : The motor 's DC power indication light ( Green ) to light up 【 Whenever the motor turns on 】
Q9: The incline motor power indication light ( Green ) 【 Whenever light up the inline motor turns on 】
D4 : The motor running light indication ( Yellow ) 【 Whenever the LED will light up the motor turns on 】
D3 : The motor speed slow down light indication ( Yellow ) 【 the LED will flash Whenever the motor slow down status 】
D2 : The motor speed up light indication ( Yellow ) 【 Whenever the LED will flash in the motor speed up status 】
Q5: The incline motor rises indication light ( Yellow ) 【 Whenever the LED will light up the incline motor is rising 】
Q6: The incline motor go- down light indication ( Yellow ) 【 Whenever the LED will light up the incline motor is going down 】
D1 : The motor driver protection light indication ( Red ) 【 the red LED will light up Whenever the motor driver is abnormal 】
If replacing PF controller with optical sensor it is necessary to replace the speed sensor with a magnetic one, already included in the kit. Check if the pulley on the front roller has a built in magnet. If not , insert into the slot a round magnet 1 cm / 0.39 in diam.
PF Controllers are a Endex compatible. Controllers PF-901, PF902 and PF903 can be replaced with Endex DCMD57, other controllers (PF905 - PF906) should be replaced with DCMD66 .
Technical specs
Input Voltage : 230V ± 15%
Output Power : Output Voltage Range 10 V ~ 200 V
Output Current - Max 12A
Links:
DC Motor Driver
J6 : AC power input
J7 : DC motor connection
J1 : Driver IO control
J3 : Motor speed signal input
Incline Motor Driver
J10 : Incline motor connection
J2 : Incline motor control IO
J4 : Incline motor position feedback
Adjustment trimmer:
V1 : Motor torque
RV3 : Max ( set before shipment)
LED
Q8: The console 's power supply DC12V light indication (green ) light up 【 】 Whenever power on
D7 : The motor 's DC power indication light ( Green ) to light up 【 Whenever the motor turns on 】
Q9: The incline motor power indication light ( Green ) 【 Whenever light up the inline motor turns on 】
D4 : The motor running light indication ( Yellow ) 【 Whenever the LED will light up the motor turns on 】
D3 : The motor speed slow down light indication ( Yellow ) 【 the LED will flash Whenever the motor slow down status 】
D2 : The motor speed up light indication ( Yellow ) 【 Whenever the LED will flash in the motor speed up status 】
Q5: The incline motor rises indication light ( Yellow ) 【 Whenever the LED will light up the incline motor is rising 】
Q6: The incline motor go- down light indication ( Yellow ) 【 Whenever the LED will light up the incline motor is going down 】
D1 : The motor driver protection light indication ( Red ) 【 the red LED will light up Whenever the motor driver is abnormal 】
We found other products you might like!
