LIEO PF905 | PF 906 | DKN - Power First- BH Fitness | Replacement KIT

Special Price €169.99 Regular Price €240.00
In stock
Replacement kit for the motor controller board PF 905 - PF 906 (DKN, BH Fitness, Carnielli; Power First). The kit consists of:
* Motor Controller board for treadmill, branded Endex model DCMD66
* Magnetic speed sensor

Controller DCMD66 compatible with models PF905 - PF906. Magnetic speed sensor . Power Incline with Faston connection type. See attached image to make changes if the original controller has other connector types.

If replacing PF controller with optical sensor it is necessary to replace the speed sensor with a magnetic one, already included in the kit. Check if the pulley on the front roller has a built in magnet. If not , insert into the slot a round magnet 1 cm / 0.39 in diam.

PF Controllers are a Endex compatible. Controllers PF-901, PF902 and PF903 can be replaced with Endex DCMD57, other controllers (PF905 - PF906) must be replaced with DCMD66 .

Technical specs

Input Voltage : 230V ± 15%
Output Power : Output Voltage Range 10 V ~ 200 V
Output Current - Max 12A


DC Motor Driver
J6 : AC power input
J7 : DC motor connection
J1 : Driver IO control
J3 : Motor speed signal input

Incline Motor Driver
J10 : Incline motor connection
J2 : Incline motor control IO
J4 : Incline motor position feedback

Adjustment trimmer:
V1 : Motor torque
RV3 : Max ( set before shipment)

Q8: The console's power supply DC12V light indication (green ) light up 【 】 Whenever power on
D7 : The motor 's DC power indication light ( Green ) to light up 【 Whenever the motor turns on 】
Q9: The incline motor power indication light ( Green ) 【 Whenever light up the inline motor turns on 】
D4 : The motor running light indication ( Yellow ) 【 Whenever the LED will light up the motor turns on 】
D3 : The motor speed slow down light indication ( Yellow ) 【 the LED will flash Whenever the motor slow down status 】
D2 : The motor speed up light indication ( Yellow ) 【 Whenever the LED will flash in the motor speed up status 】
Q5: The incline motor rises indication light ( Yellow ) 【 Whenever the LED will light up the incline motor is rising 】
Q6: The incline motor go- down light indication ( Yellow ) 【 Whenever the LED will light up the incline motor is going down 】
D1 : The motor driver protection light indication ( Red ) 【 the red LED will light up Whenever the motor driver is abnormal 】

We found other products you might like!
© 2014- Salesource Limited. All Rights Reserved

All other trade-marks, service marks, registered trade-marks, or registered service marks mentioned in this Website are the property of their respective owners.

Contact us by email and we will reply within 48 hours.
Sales: [email protected]

Company details: Salesource Limited, registered in England.
Registered address: 85 Great Portland Street, London, W1W 7LT, United Kingdom
Registration no. 08901785
Sales in the EU are managed by GP Services Limited, Malta, European Union.

All pictures shown are for illustrative purpose only and are meant for you to identify the spare part you need easily. Actual product may vary due to product enhancement. If not expressly stated otherwise, the shapes, sizes, specifications may be different. Our technicians have validated the compatibility of each item with the original spare part for all the items on the store.

This Website is safe. Start SSL certificate installed.
SSL certificate