Lemmar high quality motor compatible with Icon P.M.D.C 130V NEW | PMDC Icon Motor | code 243340, 249633, 295730, 215392, C3364, 238787, 251162, 235911, 248147, 240226, 261414, 220337, 250552, 261048, 274614, 275671, 300023, 314571, 339850, 344684, 349568
Special Price
€159.99
Regular Price
€260.00
In stock
SKU
X3-MT-90-LM-9-CON-FASCE-8-10
Lemmar replacement motor for Icon PMDC motors. Some improvements have been introduced with this brand new Lemmar motor.
1. For additional user safety, a grounding cable has been added to the motor.
Compatible with 295727, 313896, 347895, 356320, 313901, 243340, 285375, 295730, 215392, C3364, 238787, 251162, 235911, 248147, 240226, 261414, 220337, 250552, 261048, 274614, 275671, 300023, 314571, 339850, 344684, 349568, 249633.
Warning: on all Weslo, Nordic Track and Proform treadmills, we suggest to step on the siderails, start the treadmill at very low speed (1mph/1kmh) and THEN walk on the running belt. In specific conditions, stepping directly on the belt and starting the treadmill may cause a current surge which can damage the treadmill motor.
1. For additional user safety, a grounding cable has been added to the motor.
Compatible with 295727, 313896, 347895, 356320, 313901, 243340, 285375, 295730, 215392, C3364, 238787, 251162, 235911, 248147, 240226, 261414, 220337, 250552, 261048, 274614, 275671, 300023, 314571, 339850, 344684, 349568, 249633.
Warning: on all Weslo, Nordic Track and Proform treadmills, we suggest to step on the siderails, start the treadmill at very low speed (1mph/1kmh) and THEN walk on the running belt. In specific conditions, stepping directly on the belt and starting the treadmill may cause a current surge which can damage the treadmill motor.
Replacement motor for treadmill
Suitable for home fitness equipment.
This Lemmar high quality motor is the perfect replacement for Icon standard motors.
This replacement treadmill motor has a diameter of 9 cm, compared to the original 8 cm motor. This allows a better heat dissipation and allows the motor to last more.
Installation
1. Remove the motor fan from the old motor
2. Unscrew the two long screws, open the motor and remove thermal protection (blue cables)
3. Install the replacement motor
4. Apply the thermal protection on the new motor. Please insulate it with plastic from the frame, as shows in installation pictures
5. Connect motor black cable to A- and red cable to A+
6. Connect the grounding cable
7. Connect the blue thermal protection switch
Don't forget to
1. Clean and lube running deck
2. Keep running belt cleaned
3. Check after each training if the motor becomes hot (over 45/50°C) or smells, more maintenance is required.
Suitable for home fitness equipment.
This Lemmar high quality motor is the perfect replacement for Icon standard motors.
This replacement treadmill motor has a diameter of 9 cm, compared to the original 8 cm motor. This allows a better heat dissipation and allows the motor to last more.
Installation
1. Remove the motor fan from the old motor
2. Unscrew the two long screws, open the motor and remove thermal protection (blue cables)
3. Install the replacement motor
4. Apply the thermal protection on the new motor. Please insulate it with plastic from the frame, as shows in installation pictures
5. Connect motor black cable to A- and red cable to A+
6. Connect the grounding cable
7. Connect the blue thermal protection switch
Don't forget to
1. Clean and lube running deck
2. Keep running belt cleaned
3. Check after each training if the motor becomes hot (over 45/50°C) or smells, more maintenance is required.
We found other products you might like!
-
ORIGINAL | Icon motor - P.M.D.C 130V NEW | PMDC Icon Motor | code 243340, 295730, 215392, C3364, 249633Special Price €299.99 Regular Price €350.00